You might think it takes a lot of specialized knowledge about technology to use green energy technology. However, you don’t need to become a technology expert to use green energy technology in your home. You just need some basic information about how to use this technology to save energy. Read on for some tips.
When you are not using your appliances, you should make sure they are turned off. If you are in a room, make sure that the light is turned off when you exit. If you leave your home, ensure the TV is turned off. These little things can greatly decrease the amount of energy you use in your home, which will leave you with some extra cash in your pocket at the end of the month.
Simply cleaning or changing the filter on your furnace can cut electricity costs significantly. Too much dirt or dust built up in the vents can make more heat necessary to warm the house. It only takes a short amount of time to clean these, and you will notice the change in your bills!
Install timers, motion sensors, or sound sensors on lamps, lights and other electrical devices to automate their functions. Such sensors are ideal if you have a hard time remembering to turn off the lights, and because they conserve energy, they can save you a significant amount of your power bill.
Reverse the direction of the blades on your fan if you’d like to cut heating costs by as much as 10 percent! Although most people use fans for cooling, it’s possible to use them to suck cold air up and make your home feel much warmer without turning up the heat.
If you are in favor of using green energy to save money as well as to help the environment, try using an energy system that omits fossil fuels such as coal and natural gas, as these tend to emit carbon dioxide. Instead, use a renewable energy system such as solar, wind or hydro-power.
Many people who own homes with air-conditioning fail to realize how much energy is used by these units. If you have an air-conditioned home, consider a greener way of cooling off by saving the energy used to cool the air. Try to save air-conditioning for the hottest days. Keep blinds and drapes drawn during the hottest hours and open windows and doors after the sun goes down. Ceiling fans can also help a great deal!
Measure the prevailing wind speed on your property before considering a wind generator. In order for wind energy to be cost-effective, you need a wind speed greater than 8.5 to 9 MPH at least sixty percent of the time. Any slower, and the turbine won’t spin fast enough to generate much electricity.
Think about using the wind to power your home for an excellent source of green energy. You will not only be off the power grid, but the wind is an emission free source of energy that is in plentiful supply in many areas of the world. The initial cost may be high, but the savings in the long run are high as well.
A very easy and cheap way to save on your high energy bills is to try installing some low flow shower heads and faucets. Switching from the standard, 2.5 gallon/minute shower heads, to the low flow 1.5 gallon/minute ones, can help http://www.myledlightingguide.com/ you save a lot with your hot water energy costs.
Don’t try to install a wind generator on a small piece of property. First of all, you’ll likely get complaints from the neighbors, as an efficient wind http://www.my-led-lighting-guide.tumblr.com turbine needs to be at least 30 feet off the ground. Secondly, you need about an acre of land in order to ensure an unobstructed prevailing wind.
A high-efficiency furnace becomes far less efficient with a clogged, dirty filter, so change your furnace filters often. This is especially important if you use tightly-woven pleated filters, because the HVAC system must work much harder to draw in air through its tiny openings. Most filters need to be changed or cleaned at least once every 3 months.
Invest in solar power for your home. Adding a few solar panels to your roof can actually decrease the cost of heating or cooling your home by up to 50%! Talk to a professional about where best to install them on your roof, as the placement is very important to get the optimal amount of direct sunlight.
If you simply cannot afford to upgrade or replace any part of your home’s energy systems, then change your energy-using habits instead. For example, take short showers instead of long baths and only wash maximum capacity loads of clothes or dishes to cut back on water consumption. Likewise, shut off any lights or appliances before leaving a room.
Have your frozen foods thawing in the refrigerator if you want to save energy. This is a safe way to that food, but also decreases your fridges temperature. This means less energy is needed.
If you’ve tried compact fluorescent lightbulbs in the past, but found their light to be cold and unappealing, try one of the newer models. The newer bulbs are much improved, and even more energy efficient than earlier ones. The designs are also improved, with smaller profiles and non-twisty models for fixtures where the bulbs are visible.
Using green energy doesn’t have to be time-consuming or overly expensive. Simply getting fluorescent light bulbs, turning off appliances when they are not in use, or installing a programmable thermostat can help. Remember the tips in this article, so you can go green for the environment and for your wallet!